You are using an unlicensed and unsupported version of DotNetNuke Professional Edition. Please contact sales@dnncorp.com for information on how to obtain a valid license.

Features
Specs
Reviews
360 Tour
Q&A
Product/Assembly Video

Product Features

Durable

Rustproof poly hopper increases product life.

Professional Style

Enclosed gearbox.

Maneuverable

Equipped with large pneumatic tires.

.

Product Specifications

Product Name: 130 lb. Push Spreader
Model Number: 45-0462
UPC: 052613102411
Weight: 37 lbs.
Pallet Quantity: 10
Carton Dimension (L x W x H): 27.0" x 25.5" x 15.8"
Assembled Product Dimension (L x W x H): 48.0" x 27.1" x 33.6"
Category: Spreaders
Wheel Dimension: 10"
Wheel Type: Pneumatic
Standard Pack: 1

Product Manual

Parts List

Product Reviews

Rated 3 out of 5 by RT65 from Front left wheel retention. Have not used the spreader yet. Just spent 3 hours putting it together. Rolled it around the yard and the front left wheel will not stay on. The little plastic retainer button pushed over the axel is totally inadequate as a retaining device to keep the wheel on. The right drive wheel is no problem because of the pin that holds the wheel on and so that that that wheel can drive the spreading device. There should be another pin on the outside of the wheel on the left side to keep it on the axel. There is no hole in the axel at that point to place a pin. That part of the design is flawed to a point in my estimation. Any suggestions before I return the spreader.

Date published: 2016-08-05

Rated 4 out of 5 by jglitman from Good Spreader with minor improvements I purchased this last week from Home Depot. I assembled it in about 1 hour 15 mins. Overall I am happy with the spreader and seems to be strong and well thought out. One exception is the plastic caps that hold the wheels on. These caps are fine for somethings but not for this heavy duty unit. A 130lb hopper is meant for larger yards and when you take into account hills, bumps and slopes in my property, I just don't see the caps holding up long. I did end up drilling a 7/32 hole on each axle and installed an extra 3/4" x 1 1/4 inch washer along with a 1/8" x 2 9/16" hitch pin. You could also use a 3/16 cotter pin if you prefer but the hitch pin makes it easy to remove wheel if need to grease or service. Spent $3 in washers and hitch pins at local hardware store and well worth it.

Date published: 2019-04-15

Rated 5 out of 5 by Brucet05 from 5 star customer service: I just bought this unit, I wanted something that was built well and would hold up. I read the reviews, and like the reviews said it’s not the easiest to assemble. The flow control component wasn’t put together tightly and came apart after using only a short time. I called customer service, sorry I don’t recall her name. She was great and went the extra mile to find how the controller assembly went back together ( as it was factory assembled and the only thing not shown on an otherwise very comprehensive instruction manual.) I work for a manufacturer, and greatly appreciated my experience with the customer service gal here at Agri-fab. Great job!

Date published: 2020-05-05

Rated 5 out of 5 by Anonymous from Well built but very large hopper I was impressed with how solid this spread is. I just put it together last night and the video's helped out. A couple of quality control snafus noted as the "Agri-Fab" sticker on the front of the hopper is upside down and the pre-assembled flow control arm was installed backwards. Other than that no problems. My only 2 goals when ordering was to get one well made that would last and had an even spreading pattern, This one appears to have met goal #1 and the verdict is still out on #2. My only regret is not realizing how large the 130 lb. hopper would be or that they offer an 85 and 100 lb. model. I'm thinking this one would be difficult to push through a lawn if full.

Date published: 2019-09-08

Rated 4 out of 5 by Basepay from AGRI spreader This is a really good product. My previous green spreader broke at the end of fall and had to replace it. Checked around for a couple of months and decided on this. I only used it once so far and was great. Smooth and easy over the lawn with really good spreading. Assembly was easy and I aslo oiled and greased per the instructions. The reason for 4 stars was the fertilizer chunks would clog but not because of the spreader, that was a product problem. I did purchase the screen for the bottom of the spreader to keep out chunks. Can't wait to use again. I also think the screen should come with the spreader for the price. I would recommend this product.

Date published: 2020-03-12

Rated 4 out of 5 by My nane is Thomas from The first time I used this product , the agitater came out , where I dont know? the retainer pin came out and the bearing and grommet came out..I called and they sent me replacement parts ASAP,Thanks T Noble,, PS I GLUED THEM IN WITH GORILLA GLUE and made a replacement pin that wont come out.

Date published: 2015-04-05

Rated 5 out of 5 by LawnCareNut2 from Awesome Spreader/Agri-Fab 130lb Push Spreader Been looking for a spreader that will throw consistently and I found it with the Agri-Fab 130lb. Spreader. Found the spreader easy to assemble and easy to use. Pneumatic tires make pushing the spreader really easy over bumpy ground (my yard is not the smoothest). I have a very large yard (almost 2 acres), should have probably purchased the pull-behind 130lb. spreader instead. Will it hold 130 pounds of granular fertilizer? No! But it will hold 100 pounds and that's plenty to be pushing around. I have only used it to spread granular fertilizer. Walk at a good steady pace and this spreader will do a great job for you. I really like it! I would definitely recommend.

Date published: 2021-05-11

Rated 5 out of 5 by DToo from Handled the job well I purchased this spreader for use on our 2 acre property. Our land is very bumpy, so I knew I needed pneumatic tires. I also did not want to have to refill the hopper every other minute. This spreader fulfilled all of our expectations! Worked very well and we spread 200lbs of organic fertilizer in 30 minutes or so. Prior to purchase I read online reviews stating the installation instructions were not adequate, I found them to be just fine. I did pull up the U-Tube videos to go along with the quick guide, I had no problems assembling this spreader. Hopfully this spreader will last a really long time for the price!

Date published: 2019-04-05

130 lb. Push Spreader Reviews - page 2

Questions

I started the assembly of a push spreader 45-0462 couple months ago and when I got ready to complete, cannot not find the enclosed step by step instructions. Is there a PDF that can be forwarded. I see the video is available and will try but would prefer 

Asked by: TRC309

I have emailed you the manual. Thank you.

Answered by: Customer Care Backup

Date published: 2023-03-13

I am looking to convert my 45-04622 push spreader into a pull spreader. After reviewing the parts list for the like push and pull spreaders, it looks pretty simple. Do you sell a kit for this or would I need to purchase the individual parts?

Asked by: msmith5353

Converting a unit from it initial design of use to something other is not recommended . Sorry there are no conversion kits. Please be advised as to if you alter the unit from its initial design that you will void the warranty. Thank you

Answered by: Customer Care Backup

Date published: 2023-02-17

How do you remove the wheels

Asked by: Stella1

You would need to pry the hub caps off the wheels. Once removed they do not go back on. You can call 800-448-9282 to purchase replacement parts. Thank you.

Answered by: Customer Care Backup

Date published: 2023-01-25

Hi, Is it possible to convert a 45-0463 (Tow spreader) into a 45-0462 (push Spreader)? If so, what additional parts are needed?

Asked by: GFLO

Unfortunately it is not recommended to convert from a tow spreader to a push spreader. We do offer a 130# tow spreader 45-04623. Also we offer 45-04622 push spreader. You can call 800-448-9282 and customer care can assist you. Thank you

Answered by: Customer Care Backup

Date published: 2022-11-07

The spreader doesn't broadcast any further than the width of the hopper. The impeller is installed properly. Is there an additional setting somewhere that needs adjusting?

Asked by: Kit01

You may need to adjust your speed. the faster you go will allow the impeller to rotate faster which will throw the product out further. Thank you

Answered by: Customer Care Backup

Date published: 2022-07-28

Can you this spreader to spread top soil?

Asked by: Jay77

Thank you for your interest in the Agri-Fab push spreader. No, our spreaders will not work with top soil. We recommend granular or pelleted product only.

Answered by: Customer Care

Date published: 2022-04-25

Do you still manufacturer the Agri-Fab SmartSpreader 12 ft. W Broadcast Push High-Output Spreader For Ice Melt/Seeds 130 lb. cap.

Asked by: Checker

Thank you for your interest in the Agri-Fab 130# spreader. Our current Smart Push Spreader id 45-04622. Due to interruptions in purchased parts needed to make units this unit is back ordered at this time.

Answered by: Customer Care

Date published: 2022-04-25

Just purchased 4622, looking for spread rate chart - lbs per 1000.  I see 3 to 5 for fertilizer.  I need to spread pre emergence now at 2 Lb/ 1000.  And when I apply fert. - normally 6 lb / 1000 (crisscross pattern)  Do you have settings per lbs / 1000?

Asked by: Jaime

There is a chart on the back of the spreader. Unfortunately we do not have a chart for 1000 # per sq. feet. You can call 800-448-9282 and request the video that shows how to measure the pounds per sq. feet. Monday- Friday 7:00 am to 5:00 am

Answered by: Customer Care Backup

Date published: 2023-02-19

130 lb. Push Spreader Questions - page 2

Product/Assembly Video

Apple and the Apple logos are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Android is a trademark of Google Inc. Use of this trademark is subject to Google permissions.

Product Features

Durable

Professional Style

Maneuverable

.

Product Specifications

Product Reviews

Questions

I started the assembly of a push spreader 45-0462 couple months ago and when I got ready to complete, cannot not find the enclosed step by step instructions. Is there a PDF that can be forwarded. I see the video is available and will try but would prefer&nbsp;

I am looking to convert my 45-04622 push spreader into a pull spreader. After reviewing the parts list for the like push and pull spreaders, it looks pretty simple. Do you sell a kit for this or would I need to purchase the individual parts?

How do you remove the wheels

Hi, Is it possible to convert a 45-0463 (Tow spreader) into a 45-0462 (push Spreader)? If so, what additional parts are needed?

The spreader doesn't broadcast any further than the width of the hopper. The impeller is installed properly. Is there an additional setting somewhere that needs adjusting?

Can you this spreader to spread top soil?

Do you still manufacturer the Agri-Fab SmartSpreader 12 ft. W Broadcast Push High-Output Spreader For Ice Melt/Seeds 130 lb. cap.

Just purchased 4622, looking for spread rate chart - lbs per 1000. &nbsp;I see 3 to 5 for fertilizer. &nbsp;I need to spread pre emergence now at 2 Lb/ 1000. &nbsp;And when I apply fert. - normally 6 lb / 1000 (crisscross pattern) &nbsp;Do you have settings per lbs / 1000?

Product/Assembly Video

I started the assembly of a push spreader 45-0462 couple months ago and when I got ready to complete, cannot not find the enclosed step by step instructions. Is there a PDF that can be forwarded. I see the video is available and will try but would prefer

Just purchased 4622, looking for spread rate chart - lbs per 1000. I see 3 to 5 for fertilizer. I need to spread pre emergence now at 2 Lb/ 1000. And when I apply fert. - normally 6 lb / 1000 (crisscross pattern) Do you have settings per lbs / 1000?